Changeset 287 for trunk/configure

Timestamp:

05/20/09 22:53:04 (3 years ago)

Author:

ath

bzr:base-revision:

alberto.botti@gmail.com-20090309124935-5ism9w2uyk4rv609

bzr:committer:

Alberto Botti <alberto.botti@gmail.com>

bzr:file-ids:

INSTALL 216@45ad373b-3914-0410-8193-a61cc481f39f:trunk:INSTALL
Makefile.in 216@45ad373b-3914-0410-8193-a61cc481f39f:trunk:Makefile.in
aclocal.m4 216@45ad373b-3914-0410-8193-a61cc481f39f:trunk:aclocal.m4
configure 216@45ad373b-3914-0410-8193-a61cc481f39f:trunk:configure
fm_gui/INSTALL 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2FINSTALL
fm_gui/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2FMakefile.in
fm_gui/aclocal.m4 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Faclocal.m4
fm_gui/config.guess 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fconfig.guess
fm_gui/config.sub 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fconfig.sub
fm_gui/configure 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fconfigure
fm_gui/configure.ac 213@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fconfigure.ac
fm_gui/data/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fdata%2FMakefile.in
fm_gui/data/icons/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fdata%2Ficons%2FMakefile.in
fm_gui/ltmain.sh 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fltmain.sh
fm_gui/m4/libtool.m4 libtool.m4-20090206151840-bg99halbd330eo1r-1
fm_gui/m4/ltoptions.m4 ltoptions.m4-20090206151840-bg99halbd330eo1r-2
fm_gui/m4/ltsugar.m4 ltsugar.m4-20090206151840-bg99halbd330eo1r-3
fm_gui/m4/ltversion.m4 ltversion.m4-20090206151840-bg99halbd330eo1r-4
fm_gui/m4/shave.m4 shave.m4-20090520203901-o1hatmfdkfft18r5-3
fm_gui/shave-libtool.in shavelibtool.in-20090520203901-o1hatmfdkfft18r5-1
fm_gui/shave.in shave.in-20090520203901-o1hatmfdkfft18r5-2
fm_gui/src/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fsrc%2FMakefile.in
fm_gui/src/marlin/Makefile.in 247@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fsrc%2Fmarlin%2FMakefile.in
fm_gui/src/marlin/cursors/Makefile.in 261@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fsrc%2Fmarlin%2Fcursors%2FMakefile.in
fm_gui/src/tx_widgets/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fsrc%2Ftx_widgets%2FMakefile.in
fm_gui/src/tx_widgets/icons/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_gui%2Fsrc%2Ftx_widgets%2Ficons%2FMakefile.in
fm_server/INSTALL 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2FINSTALL
fm_server/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2FMakefile.in
fm_server/aclocal.m4 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Faclocal.m4
fm_server/config.guess 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Fconfig.guess
fm_server/config.h.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Fconfig.h.in
fm_server/config.sub 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Fconfig.sub
fm_server/configure 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Fconfigure
fm_server/configure.ac 211@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Fconfigure.ac
fm_server/ltmain.sh 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Fltmain.sh
fm_server/m4/libtool.m4 libtool.m4-20090501163948-c5skz0esgv5bi73c-1
fm_server/m4/ltoptions.m4 ltoptions.m4-20090501163948-c5skz0esgv5bi73c-2
fm_server/m4/ltsugar.m4 ltsugar.m4-20090501163948-c5skz0esgv5bi73c-3
fm_server/m4/ltversion.m4 ltversion.m4-20090501163948-c5skz0esgv5bi73c-4
fm_server/m4/lt%7Eobsolete.m4 ltobsolete.m4-20090501163948-c5skz0esgv5bi73c-5
fm_server/m4/shave.m4 shave.m4-20090520203901-o1hatmfdkfft18r5-6
fm_server/shave-libtool.in shavelibtool.in-20090520203901-o1hatmfdkfft18r5-4
fm_server/shave.in shave.in-20090520203901-o1hatmfdkfft18r5-5
fm_server/src/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Fsrc%2FMakefile.in
fm_server/src/fm_effect_rubber/Makefile.in 236@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Fsrc%2Ffm_effect_rubber%2FMakefile.in
fm_server/src/fm_input_buffer/Makefile.in 276@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Fsrc%2Ffm_input_buffer%2FMakefile.in
fm_server/src/fm_input_gst/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Fsrc%2Ffm_input_gst%2FMakefile.in
fm_server/src/fm_song_db/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Fsrc%2Ffm_song_db%2FMakefile.in
fm_server/test/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:fm_server%2Ftest%2FMakefile.in
install-sh 216@45ad373b-3914-0410-8193-a61cc481f39f:trunk:install-sh
missing 216@45ad373b-3914-0410-8193-a61cc481f39f:trunk:missing
rgc/INSTALL 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2FINSTALL
rgc/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2FMakefile.in
rgc/aclocal.m4 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Faclocal.m4
rgc/bindings/Makefile.in makefile.in-20090304125849-94t07i1rdeqfbiz4-3
rgc/config.guess 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fconfig.guess
rgc/config.sub 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fconfig.sub
rgc/configure 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fconfigure
rgc/configure.ac 215@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fconfigure.ac
rgc/depcomp 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fdepcomp
rgc/include/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Finclude%2FMakefile.in
rgc/include/client/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Finclude%2Fclient%2FMakefile.in
rgc/include/common/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Finclude%2Fcommon%2FMakefile.in
rgc/include/connection/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Finclude%2Fconnection%2FMakefile.in
rgc/include/connection/dbus/Makefile.in makefile.in-20090309124738-7jqwtsoeh0smey9o-3
rgc/include/connection/rbp/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Finclude%2Fconnection%2Frbp%2FMakefile.in
rgc/include/server/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Finclude%2Fserver%2FMakefile.in
rgc/install-sh 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Finstall-sh
rgc/ltmain.sh 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fltmain.sh
rgc/m4/libtool.m4 libtool.m4-20090107122845-jrcu8jgd4l6uescz-1
rgc/m4/ltoptions.m4 ltoptions.m4-20090107122845-jrcu8jgd4l6uescz-2
rgc/m4/ltsugar.m4 ltsugar.m4-20090107122845-jrcu8jgd4l6uescz-3
rgc/m4/ltversion.m4 ltversion.m4-20090107122845-jrcu8jgd4l6uescz-4
rgc/m4/shave.m4 shave.m4-20090520203901-o1hatmfdkfft18r5-9
rgc/missing 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fmissing
rgc/mkinstalldirs 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fmkinstalldirs
rgc/rgc.anjuta 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Frgc.anjuta
rgc/shave-libtool.in shavelibtool.in-20090520203901-o1hatmfdkfft18r5-7
rgc/shave.in shave.in-20090520203901-o1hatmfdkfft18r5-8
rgc/src/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fsrc%2FMakefile.in
rgc/src/client/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fsrc%2Fclient%2FMakefile.in
rgc/src/common/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fsrc%2Fcommon%2FMakefile.in
rgc/src/connection/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fsrc%2Fconnection%2FMakefile.in
rgc/src/connection/dbus/Makefile.in makefile.in-20090309124819-kmj94w5bsr24cefl-3
rgc/src/connection/rbp/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fsrc%2Fconnection%2Frbp%2FMakefile.in
rgc/src/server/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Fsrc%2Fserver%2FMakefile.in
rgc/test/Makefile.in 210@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rgc%2Ftest%2FMakefile.in
rubberband/INSTALL 234@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rubberband%2FINSTALL
rubberband/Makefile.am 234@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rubberband%2FMakefile.am
rubberband/Makefile.in 234@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rubberband%2FMakefile.in
rubberband/aclocal.m4 234@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rubberband%2Faclocal.m4
rubberband/config.guess 234@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rubberband%2Fconfig.guess
rubberband/config.h.in config.h.in-20090520203915-39h2rbdzw4kpv3nn-1
rubberband/config.sub 234@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rubberband%2Fconfig.sub
rubberband/configure 234@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rubberband%2Fconfigure
rubberband/configure.ac 234@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rubberband%2Fconfigure.ac
rubberband/include/Makefile.in 234@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rubberband%2Finclude%2FMakefile.in
rubberband/ltmain.sh 234@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rubberband%2Fltmain.sh
rubberband/m4 m4-20090501163948-c5skz0esgv5bi73c-6
rubberband/m4/libtool.m4 libtool.m4-20090501163948-c5skz0esgv5bi73c-7
rubberband/m4/ltoptions.m4 ltoptions.m4-20090501163948-c5skz0esgv5bi73c-8
rubberband/m4/ltsugar.m4 ltsugar.m4-20090501163948-c5skz0esgv5bi73c-9
rubberband/m4/ltversion.m4 ltversion.m4-20090501163948-c5skz0esgv5bi73c-10
rubberband/m4/lt%7Eobsolete.m4 ltobsolete.m4-20090501163948-c5skz0esgv5bi73c-11
rubberband/m4/shave.m4 shave.m4-20090520203915-39h2rbdzw4kpv3nn-4
rubberband/shave-libtool.in shavelibtool.in-20090520203915-39h2rbdzw4kpv3nn-2
rubberband/shave.in shave.in-20090520203915-39h2rbdzw4kpv3nn-3
rubberband/src/Makefile.in 234@45ad373b-3914-0410-8193-a61cc481f39f:trunk:rubberband%2Fsrc%2FMakefile.in

bzr:mapping-version:

v4

bzr:merge:

alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq

bzr:repository-uuid:

45ad373b-3914-0410-8193-a61cc481f39f

bzr:revision-id:

alberto.botti@gmail.com-20090520204117-720d94nsd67ssr26

bzr:revno:

79

bzr:revprop:branch-nick:

trunk

bzr:root:

trunk

bzr:text-parents:

INSTALL alberto.botti@gmail.com-20090107122405-vhbxkshgfhlx8kyv
Makefile.in alberto.botti@gmail.com-20090218123806-qufqpor0got1ukjt
aclocal.m4 alberto.botti@gmail.com-20090218123806-qufqpor0got1ukjt
configure alberto.botti@gmail.com-20090218123806-qufqpor0got1ukjt
fm_gui/INSTALL svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:257
fm_gui/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/aclocal.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/config.guess svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:257
fm_gui/config.sub svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:257
fm_gui/configure alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/configure.ac alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/data/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/data/icons/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/ltmain.sh alberto.botti@gmail.com-20090218123806-qufqpor0got1ukjt
fm_gui/m4/libtool.m4 alberto.botti@gmail.com-20090218123806-qufqpor0got1ukjt
fm_gui/m4/ltoptions.m4 alberto.botti@gmail.com-20090218123806-qufqpor0got1ukjt
fm_gui/m4/ltsugar.m4 alberto.botti@gmail.com-20090218123806-qufqpor0got1ukjt
fm_gui/m4/ltversion.m4 alberto.botti@gmail.com-20090218123806-qufqpor0got1ukjt
fm_gui/src/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/src/marlin/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/src/marlin/cursors/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/src/tx_widgets/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/src/tx_widgets/icons/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/INSTALL svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:257
fm_server/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/aclocal.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/config.guess svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:257
fm_server/config.h.in svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:224
fm_server/config.sub svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:257
fm_server/configure alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/configure.ac alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/ltmain.sh svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:257
fm_server/src/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/src/fm_effect_rubber/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/src/fm_input_buffer/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/src/fm_input_gst/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/src/fm_song_db/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/test/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
install-sh alberto.botti@gmail.com-20090107122405-vhbxkshgfhlx8kyv
missing alberto.botti@gmail.com-20090107122405-vhbxkshgfhlx8kyv
rgc/INSTALL alberto.botti@gmail.com-20090107123524-0qkwjfwz3rthe01q
rgc/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/aclocal.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/bindings/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/config.guess alberto.botti@gmail.com-20090107123524-0qkwjfwz3rthe01q
rgc/config.sub alberto.botti@gmail.com-20090107123524-0qkwjfwz3rthe01q
rgc/configure alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/configure.ac alberto.botti@gmail.com-20090304130000-1a9z78agyveb0x12
rgc/depcomp alberto.botti@gmail.com-20090107123524-0qkwjfwz3rthe01q
rgc/include/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/include/client/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/include/common/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/include/connection/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/include/connection/dbus/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/include/connection/rbp/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/include/server/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/install-sh alberto.botti@gmail.com-20090107123524-0qkwjfwz3rthe01q
rgc/ltmain.sh alberto.botti@gmail.com-20090107123524-0qkwjfwz3rthe01q
rgc/m4/libtool.m4 alberto.botti@gmail.com-20090204203706-s4k8dta7qo2zk9xr
rgc/m4/ltoptions.m4 alberto.botti@gmail.com-20090204203706-s4k8dta7qo2zk9xr
rgc/m4/ltsugar.m4 alberto.botti@gmail.com-20090204203706-s4k8dta7qo2zk9xr
rgc/m4/ltversion.m4 alberto.botti@gmail.com-20090204203706-s4k8dta7qo2zk9xr
rgc/missing alberto.botti@gmail.com-20090107123524-0qkwjfwz3rthe01q
rgc/mkinstalldirs alberto.botti@gmail.com-20090107123524-0qkwjfwz3rthe01q
rgc/rgc.anjuta svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:210
rgc/src/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/src/client/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/src/common/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/src/connection/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/src/connection/dbus/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/src/connection/rbp/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/src/server/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/test/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/INSTALL svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:257
rubberband/Makefile.am svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:235
rubberband/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/aclocal.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/config.guess svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:257
rubberband/config.sub svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:257
rubberband/configure alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/configure.ac alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/include/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/ltmain.sh svn-v3-trunk0:45ad373b-3914-0410-8193-a61cc481f39f:trunk:257
rubberband/src/Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj

bzr:text-revisions:

INSTALL alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
Makefile.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
aclocal.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
configure alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/INSTALL alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/aclocal.m4 alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/config.guess alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/config.sub alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/configure alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/configure.ac alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/data/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/data/icons/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/ltmain.sh alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/m4/libtool.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/m4/ltoptions.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/m4/ltsugar.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/m4/ltversion.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_gui/m4/shave.m4 alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/shave-libtool.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/shave.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/src/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/src/marlin/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/src/marlin/cursors/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/src/tx_widgets/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_gui/src/tx_widgets/icons/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/INSTALL alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/aclocal.m4 alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/config.guess alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/config.h.in alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/config.sub alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/configure alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/configure.ac alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/ltmain.sh alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/m4/libtool.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/m4/ltoptions.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/m4/ltsugar.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/m4/ltversion.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/m4/lt%7Eobsolete.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
fm_server/m4/shave.m4 alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/shave-libtool.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/shave.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/src/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/src/fm_effect_rubber/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/src/fm_input_buffer/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/src/fm_input_gst/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/src/fm_song_db/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
fm_server/test/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
install-sh alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
missing alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/INSTALL alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/aclocal.m4 alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/bindings/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/config.guess alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/config.sub alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/configure alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/configure.ac alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/depcomp alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/include/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/include/client/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/include/common/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/include/connection/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/include/connection/dbus/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/include/connection/rbp/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/include/server/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/install-sh alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/ltmain.sh alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/m4/libtool.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/m4/ltoptions.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/m4/ltsugar.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/m4/ltversion.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/m4/shave.m4 alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/missing alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/mkinstalldirs alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rgc/rgc.anjuta alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/shave-libtool.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/shave.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/src/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/src/client/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/src/common/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/src/connection/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/src/connection/dbus/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/src/connection/rbp/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/src/server/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rgc/test/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rubberband/INSTALL alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/Makefile.am alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rubberband/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rubberband/aclocal.m4 alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rubberband/config.guess alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/config.h.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rubberband/config.sub alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/configure alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rubberband/configure.ac alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rubberband/include/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rubberband/ltmain.sh alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/m4/libtool.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/m4/ltoptions.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/m4/ltsugar.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/m4/ltversion.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/m4/lt%7Eobsolete.m4 alberto.botti@gmail.com-20090501163956-q6ch10q4b3mdzspj
rubberband/m4/shave.m4 alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rubberband/shave-libtool.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rubberband/shave.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq
rubberband/src/Makefile.in alberto.botti@gmail.com-20090520203922-bc4fhabvds6atjnq

bzr:timestamp:

2009-05-20 22:41:17.608999968 +0200

bzr:user-agent:

bzr1.13.1+bzr-svn0.5.3

svn:original-date:

2009-05-20T20:41:17.609000Z

Message:

Merge shave support and update the usual autotools stuff.

Files:

• trunk/configure (modified) (143 diffs)

trunk/configure

@@ -1 +1 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for FreeMix 0.1.
+# Generated by GNU Autoconf 2.63 for FreeMix 0.1.
 #
 # Report bugs to <alberto.botti@yoda2000.net>.
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
@@ -18 +18 @@
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
@@ -40 +40 @@
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+        expr "X$arg" : "X\\(.*\\)$as_nl";
+        arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
 # The user is always right.
 if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
@@ -66 +94 @@
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""        $as_nl"
 
@@ -90 +116 @@
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   { (exit 1); exit 1; }
 fi
@@ -103 +129 @@
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
@@ -135 +154 @@
          X"$0" : 'X\(//\)$' \| \
          X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
             s//\1/
@@ -161 +180 @@
 fi
 
-  if test $as_have_required = yes &&     (eval ":
+  if test $as_have_required = yes &&     (eval ":
 (as_func_return () {
   (exit \$1)
@@ -243 +262 @@
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
@@ -264 +283 @@
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
@@ -344 +363 @@
       if test "x$CONFIG_SHELL" != x; then
   for as_var in BASH_ENV ENV
-        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-        done
-        export CONFIG_SHELL
-        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+        done
+        export CONFIG_SHELL
+        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 fi
 
@@ -416 +435 @@
 test \$exitcode = 0") || {
   echo No shell found that supports shell functions.
-  echo Please tell autoconf@gnu.org about your system,
-  echo including any error possibly output before this
-  echo message
+  echo Please tell bug-autoconf@gnu.org about your system,
+  echo including any error possibly output before this message.
+  echo This can help us improve future autoconf versions.
+  echo Configuration will now proceed without shell functions.
 }
 
@@ -454 +474 @@
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
@@ -482 +502 @@
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
@@ -495 +514 @@
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
@@ -532 +554 @@
     eval sh -c '\''
       if test -d "$1"; then
-        test -d "$1/.";
+        test -d "$1/.";
       else
         case $1 in
-        -*)set "./$1";;
+        -*)set "./$1";;
         esac;
         case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
@@ -579 +601 @@
 PACKAGE_BUGREPORT='alberto.botti@yoda2000.net'
 
-ac_subst_vars='SHELL
+enable_option_checking=no
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+subdirs
+GNET_LIBS
+GNET_CFLAGS
+PKG_CONFIG
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
 PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-am__isrc
-CYGPATH_W
-PACKAGE
-VERSION
-ACLOCAL
-AUTOCONF
-AUTOMAKE
-AUTOHEADER
-MAKEINFO
-install_sh
-STRIP
-INSTALL_STRIP_PROGRAM
-mkdir_p
-AWK
-SET_MAKE
-am__leading_dot
-AMTAR
-am__tar
-am__untar
-PKG_CONFIG
-GNET_CFLAGS
-GNET_LIBS
-subdirs
-LIBOBJS
-LTLIBOBJS'
+SHELL'
 ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+'
       ac_precious_vars='build_alias
 host_alias
@@ -659 +686 @@
 ac_init_help=
 ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
 # The variables have the same names as the options, with
 # dashes changed to underlines.
@@ -757 +786 @@
 
   -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+         ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
 
   -docdir | --docdir | --docdi | --doc | --do)
@@ -776 +813 @@
 
   -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+         ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
@@ -973 +1018 @@
 
   -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+         ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
 
   -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+         ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
 
   --x)
@@ -1008 +1069 @@
     x_libraries=$ac_optarg ;;
 
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
+  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; }
@@ -1017 +1078 @@
     # Reject names that are not valid shell variable names.
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
     eval $ac_envvar=\$ac_optarg
@@ -1024 +1085 @@
   *)
     # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
     : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
@@ -1035 +1096 @@
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
+  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute directory names.
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+   { (exit 1); exit 1; }; } ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
 for ac_var in   exec_prefix prefix bindir sbindir libexecdir datarootdir \
                 datadir sysconfdir sharedstatedir localstatedir includedir \
@@ -1046 +1116 @@
 do
   eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
   case $ac_val in
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
    { (exit 1); exit 1; }; }
 done
@@ -1065 +1142 @@
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
     If a cross compiler is detected then cross compile mode will be used." >&2
   elif test "x$build_alias" != "x$host_alias"; then
@@ -1081 +1158 @@
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { echo "$as_me: error: Working directory cannot be determined" >&2
+  { $as_echo "$as_me: error: working directory cannot be determined" >&2
    { (exit 1); exit 1; }; }
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { echo "$as_me: error: pwd does not report name of working directory" >&2
+  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
    { (exit 1); exit 1; }; }
 
@@ -1092 +1169 @@
   ac_srcdir_defaulted=yes
   # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$0" : 'X\(//\)[^/]' \| \
-         X"$0" : 'X\(//\)$' \| \
-         X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$as_myself" : 'X\(//\)[^/]' \| \
+         X"$as_myself" : 'X\(//\)$' \| \
+         X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
             s//\1/
@@ -1124 +1201 @@
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
    { (exit 1); exit 1; }; }
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-        cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+        cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
    { (exit 1); exit 1; }; }
         pwd)`
@@ -1178 +1255 @@
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
+                          [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
+                          [PREFIX]
 
 By default, \`make install' will install all the files in
@@ -1190 +1267 @@
 
 Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR          info documentation [DATAROOTDIR/info]
-  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR           man documentation [DATAROOTDIR/man]
-  --docdir=DIR           documentation root [DATAROOTDIR/doc/freemix]
-  --htmldir=DIR          html documentation [DOCDIR]
-  --dvidir=DIR           dvi documentation [DOCDIR]
-  --pdfdir=DIR           pdf documentation [DOCDIR]
-  --psdir=DIR            ps documentation [DOCDIR]
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/freemix]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
 _ACEOF
 
@@ -1242 +1319 @@
   # If there are subdirs, report their specific --help.
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" || continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
     ac_builddir=.
 
@@ -1248 +1327 @@
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
@@ -1286 +1365 @@
       $SHELL "$ac_srcdir/configure" --help=recursive
     else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
     fi || ac_status=$?
     cd "$ac_pwd" || { ac_status=$?; break; }
@@ -1296 +1375 @@
   cat <<\_ACEOF
 FreeMix configure 0.1
-generated by GNU Autoconf 2.61
+generated by GNU Autoconf 2.63
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
@@ -1310 +1389 @@
 
 It was created by FreeMix $as_me 0.1, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   $ $0 $@
@@ -1346 +1425 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
+  $as_echo "PATH: $as_dir"
 done
 IFS=$as_save_IFS
@@ -1381 +1460 @@
       continue ;;
     *\'*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
@@ -1433 +1512 @@
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
@@ -1467 +1547 @@
       eval ac_val=\$$ac_var
       case $ac_val in
-      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
       esac
-      echo "$ac_var='\''$ac_val'\''"
+      $as_echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
@@ -1484 +1564 @@
         eval ac_val=\$$ac_var
         case $ac_val in
-        *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+        *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
         esac
-        echo "$ac_var='\''$ac_val'\''"
+        $as_echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
@@ -1502 +1582 @@
     fi
     test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
   } >&5
   rm -f core *.core core.conftest.* &&
@@ -1545 +1625 @@
 
 # Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
 if test -n "$CONFIG_SITE"; then
-  set x "$CONFIG_SITE"
+  ac_site_file1=$CONFIG_SITE
 elif test "x$prefix" != xNONE; then
-  set x "$prefix/share/config.site" "$prefix/etc/config.site"
-else
-  set x "$ac_default_prefix/share/config.site" \
-        "$ac_default_prefix/etc/config.site"
-fi
-shift
-for ac_site_file
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
 do
+  test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
@@ -1569 +1652 @@
   # files actually), so we avoid doing that.
   if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
       [\\/]* | ?:[\\/]* ) . "$cache_file";;
@@ -1577 +1660 @@
   fi
 else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
   >$cache_file
 fi
@@ -1592 +1675 @@
   case $ac_old_set,$ac_new_set in
     set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-        { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-        { echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-        { echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-        ac_cache_corrupted=:
+        # differences in whitespace do not lead to failure.
+        ac_old_val_w=`echo x $ac_old_val`
+        ac_new_val_w=`echo x $ac_new_val`
+        if test "$ac_old_val_w" != "$ac_new_val_w"; then
+          { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+          ac_cache_corrupted=:
+        else
+          { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+          eval $ac_var=\$ac_old_val
+        fi
+        { $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+        { $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
@@ -1614 +1706 @@
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
@@ -1624 +1716 @@
 done
 if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
    { (exit 1); exit 1; }; }
 fi
@@ -1679 +1773 @@
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in . \"$srcdir\"/." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in . \"$srcdir\"/." >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in . \"$srcdir\"/." >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in . \"$srcdir\"/." >&2;}
    { (exit 1); exit 1; }; }
 fi
@@ -1708 +1802 @@
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -1741 +1836 @@
             :
           else
-            ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-            break 3
+            rm -rf conftest.one conftest.two conftest.dir
+            echo one > conftest.one
+            echo two > conftest.two
+            mkdir conftest.dir
+            if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+              test -s conftest.one && test -s conftest.two &&
+              test -s conftest.dir/conftest.one &&
+              test -s conftest.dir/conftest.two
+            then
+              ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+              break 3
+            fi
           fi
         fi
@@ -1749 +1854 @@
     ;;
 esac
+
 done
 IFS=$as_save_IFS
 
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
@@ -1764 +1871 @@
   fi
 fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
@@ -1775 +1882 @@
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
@@ -1799 +1906 @@
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&2;}
    { (exit 1); exit 1; }; }
@@ -1812 +1919 @@
    :
 else
-   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
 Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
+$as_echo "$as_me: error: newly created file is older than distributed files!
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
@@ -1825 +1932 @@
 test "$program_suffix" != NONE &&
   program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
+# Double any \ or $.
 # By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
 # expand $ac_aux_dir to an absolute path
@@ -1842 +1946 @@
 else
   am_missing_run=
-  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
 if test -z "$MKDIR_P"; then
   if test "${ac_cv_path_mkdir+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -1885 +1989 @@
   fi
 fi
-{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-echo "${ECHO_T}$MKDIR_P" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
 
 mkdir_p="$MKDIR_P"
@@ -1898 +2002 @@
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_AWK+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
@@ -1914 +2018 @@
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -1925 +2029 @@
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
@@ -1936 +2040 @@
 done
 
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
 if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
@@ -1957 +2062 @@
 fi
 if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
   SET_MAKE=
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
@@ -1981 +2086 @@
   # test to see if srcdir already configured
   if test -f $srcdir/config.status; then
-    { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
    { (exit 1); exit 1; }; }
   fi
@@ -2037 +2142 @@
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$STRIP"; then
@@ -2053 +2158 @@
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -2064 +2169 @@
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
@@ -2077 +2182 @@
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_STRIP"; then
@@ -2093 +2198 @@
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -2104 +2209 @@
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
@@ -2116 +2221 @@
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -2154 +2255 @@
   # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
 set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   case $PKG_CONFIG in
@@ -2172 +2273 @@
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -2184 +2285 @@
 PKG_CONFIG=$ac_cv_path_PKG_CONFIG
 if test -n "$PKG_CONFIG"; then
-  { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
-echo "${ECHO_T}$PKG_CONFIG" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
@@ -2197 +2298 @@
   # Extract the first word of "pkg-config", so it can be a program name with args.
 set dummy pkg-config; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   case $ac_pt_PKG_CONFIG in
@@ -2215 +2316 @@
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -2227 +2328 @@
 ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
 if test -n "$ac_pt_PKG_CONFIG"; then
-  { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
-echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
@@ -2239 +2340 @@
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -2256 +2353 @@
 if test -n "$PKG_CONFIG"; then
         _pkg_min_version=0.9.0
-        { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
-echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; }
+        { $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
         if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-                { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+                { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
         else
-                { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+                { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
                 PKG_CONFIG=""
         fi
@@ -2270 +2367 @@
 
 pkg_failed=no
-{ echo "$as_me:$LINENO: checking for GNET" >&5
-echo $ECHO_N "checking for GNET... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for GNET" >&5
+$as_echo_n "checking for GNET... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -2278 +2375 @@
     else
         if test -n "$PKG_CONFIG" && \
-    { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnet-2.0\"") >&5
+    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnet-2.0\"") >&5
   ($PKG_CONFIG --exists --print-errors "gnet-2.0") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   pkg_cv_GNET_CFLAGS=`$PKG_CONFIG --cflags "gnet-2.0" 2>/dev/null`
@@ -2296 +2393 @@
     else
         if test -n "$PKG_CONFIG" && \
-    { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnet-2.0\"") >&5
+    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnet-2.0\"") >&5
   ($PKG_CONFIG --exists --print-errors "gnet-2.0") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   pkg_cv_GNET_LIBS=`$PKG_CONFIG --libs "gnet-2.0" 2>/dev/null`
@@ -2327 +2424 @@
         echo "$GNET_PKG_ERRORS" >&5
 
-        { { echo "$as_me:$LINENO: error: Package requirements (gnet-2.0) were not met:
+        { { $as_echo "$as_me:$LINENO: error: Package requirements (gnet-2.0) were not met:
 
 $GNET_PKG_ERRORS
@@ -2338 +2435 @@
 See the pkg-config man page for more details.
 " >&5
-echo "$as_me: error: Package requirements (gnet-2.0) were not met:
+$as_echo "$as_me: error: Package requirements (gnet-2.0) were not met:
 
 $GNET_PKG_ERRORS
@@ -2351 +2448 @@
    { (exit 1); exit 1; }; }
 elif test $pkg_failed = untried; then
-        { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+        { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
@@ -2361 +2460 @@
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
 See \`config.log' for more details." >&5
-echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
@@ -2371 +2470 @@
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
 else
         GNET_CFLAGS=$pkg_cv_GNET_CFLAGS
         GNET_LIBS=$pkg_cv_GNET_LIBS
-        { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+        { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
         :
 fi              # needed for RGC...
 
 # Start with RGC
+
+
 subdirs="$subdirs rgc"
 
@@ -2437 +2538 @@
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
@@ -2474 +2576 @@
   if test -w "$cache_file"; then
     test "x$cache_file" != "x/dev/null" &&
-      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
+      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
@@ -2496 +2598 @@
 # look for a macro that doesn't take arguments.
 ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
 t clear
 :clear
@@ -2525 +2633 @@
   # 1. Remove the extension, and $U if already installed.
   ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
   # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
   #    will be set to the directory where LIBOBJS objects are built.
@@ -2538 +2646 @@
 
 : ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #! $SHELL
 # Generated by $as_me.
@@ -2555 +2664 @@
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ## --------------------- ##
 ## M4sh Initialization.  ##
@@ -2565 +2674 @@
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
@@ -2587 +2696 @@
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+        expr "X$arg" : "X\\(.*\\)$as_nl";
+        arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
 # The user is always right.
 if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
@@ -2613 +2750 @@
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""        $as_nl"
 
@@ -2637 +2772 @@
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   { (exit 1); exit 1; }
 fi
@@ -2650 +2785 @@
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
@@ -2682 +2810 @@
          X"$0" : 'X\(//\)$' \| \
          X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
             s//\1/
@@ -2733 +2861 @@
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
@@ -2761 +2889 @@
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
@@ -2774 +2901 @@
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
@@ -2811 +2941 @@
     eval sh -c '\''
       if test -d "$1"; then
-        test -d "$1/.";
+        test -d "$1/.";
       else
         case $1 in
-        -*)set "./$1";;
+        -*)set "./$1";;
         esac;
         case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
@@ -2837 +2967 @@
 ac_log="
 This file was extended by FreeMix $as_me 0.1, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -2850 +2980 @@
 _ACEOF
 
-cat >>$CONFIG_STATUS <<_ACEOF
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 # Files that config.status was made for.
 config_files="$ac_config_files"
@@ -2856 +2992 @@
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
 
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [FILE]...
 
   -h, --help       print this help, then exit
   -V, --version    print version number and configuration settings, then exit
-  -q, --quiet      do not print progress messages
+  -q, --quiet, --silent
+                   do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
 
 Configuration files:
@@ -2877 +3014 @@
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
 FreeMix config.status 0.1
-configured by $0, generated by GNU Autoconf 2.61,
-  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2006 Free Software Foundation, Inc.
+configured by $0, generated by GNU Autoconf 2.63,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2008 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
@@ -2891 +3028 @@
 INSTALL='$INSTALL'
 MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
 ac_need_defaults=:
 while test $# != 0
@@ -2917 +3055 @@
     ac_cs_recheck=: ;;
   --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    echo "$ac_cs_version"; exit ;;
+    $as_echo "$ac_cs_version"; exit ;;
   --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
     ac_need_defaults=false;;
   --he | --h |  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit ;;
+    $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
@@ -2931 +3072 @@
 
   # This is an error.
-  -*) { echo "$as_me: error: unrecognized option: $1
+  -*) { $as_echo "$as_me: error: unrecognized option: $1
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; } ;;
@@ -2950 +3091 @@
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  CONFIG_SHELL=$SHELL
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
   export CONFIG_SHELL
-  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  exec "\$@"
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 exec 5>>config.log
 {
@@ -2966 +3109 @@
 ## Running $as_me. ##
 _ASBOX
-  echo "$ac_log"
+  $as_echo "$ac_log"
 } >&5
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
 # Handling of arguments.
@@ -2981 +3124 @@
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
 
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
@@ -3021 +3164 @@
 } ||
 {
-   echo "$me: cannot create a temporary directory in ." >&2
+   $as_echo "$as_me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
 if test -n "$CONFIG_FILES"; then
 
+
+ac_cr='
+'
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
 _ACEOF
 
 
-
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-am__isrc!$am__isrc$ac_delim
-CYGPATH_W!$CYGPATH_W$ac_delim
-PACKAGE!$PACKAGE$ac_delim
-VERSION!$VERSION$ac_delim
-ACLOCAL!$ACLOCAL$ac_delim
-AUTOCONF!$AUTOCONF$ac_delim
-AUTOMAKE!$AUTOMAKE$ac_delim
-AUTOHEADER!$AUTOHEADER$ac_delim
-MAKEINFO!$MAKEINFO$ac_delim
-install_sh!$install_sh$ac_delim
-STRIP!$STRIP$ac_delim
-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-mkdir_p!$mkdir_p$ac_delim
-AWK!$AWK$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-AMTAR!$AMTAR$ac_delim
-am__tar!$am__tar$ac_delim
-am__untar!$am__untar$ac_delim
-PKG_CONFIG!$PKG_CONFIG$ac_delim
-GNET_CFLAGS!$GNET_CFLAGS$ac_delim
-GNET_LIBS!$GNET_LIBS$ac_delim
-subdirs!$subdirs$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
-
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 65; then
+  . ./conf$$subs.sh ||
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
     break
   elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
    { (exit 1); exit 1; }; }
   else
@@ -3117 +3214 @@
   fi
 done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
 _ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
 _ACEOF
-
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+   { (exit 1); exit 1; }; }
+_ACEOF
 
 # VPATH may cause trouble with some makes, so we remove $(srcdir),
@@ -3160 +3318 @@
 fi
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 fi # test -n "$CONFIG_FILES"
 
 
-for ac_tag in  :F $CONFIG_FILES
+eval set X "  :F $CONFIG_FILES      "
+shift
+for ac_tag
 do
   case $ac_tag in
@@ -3171 +3331 @@
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
    { (exit 1); exit 1; }; };;
   :[FH]-) ac_tag=-:-;;
@@ -3201 +3361 @@
            *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
            esac ||
-           { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+           { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
    { (exit 1); exit 1; }; };;
       esac
-      ac_file_inputs="$ac_file_inputs $ac_f"
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      ac_file_inputs="$ac_file_inputs '$ac_f'"
     done
 
@@ -3211 +3372 @@
     # use $as_me), people would be surprised to read:
     #    /* config.h.  Generated by config.status.  */
-    configure_input="Generated from "`IFS=:
-          echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    configure_input='Generated from '`
+          $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+        `' by configure.'
     if test x"$ac_file" != x-; then
       configure_input="$ac_file.  $configure_input"
-      { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
+      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
     fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
 
     case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin";;
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; } ;;
     esac
     ;;
@@ -3230 +3402 @@
          X"$ac_file" : 'X\(//\)$' \| \
          X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
+$as_echo X"$ac_file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
             s//\1/
@@ -3256 +3428 @@
     while :; do
       case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
       *) as_qdir=$as_dir;;
       esac
@@ -3265 +3437 @@
          X"$as_dir" : 'X\(//\)$' \| \
          X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
             s//\1/
@@ -3286 +3458 @@
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
   ac_builddir=.
@@ -3294 +3466 @@
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
@@ -3341 +3513 @@
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # If the template does not know about datarootdir, expand it.
 # FIXME: This hack should be removed a few years after 2.60.
 ac_datarootdir_hack=; ac_datarootdir_seen=
 
-case `sed -n '/datarootdir/ {
+ac_sed_dataroot='
+/datarootdir/ {
   p
   q
@@ -3355 +3528 @@
 /@localedir@/p
 /@mandir@/p
-' $ac_file_inputs` in
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
 *datarootdir*) ac_datarootdir_seen=yes;;
 *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
   ac_datarootdir_hack='
   s&@datadir@&$datadir&g
@@ -3375 +3549 @@
 # Shell code in configure.ac might set extrasub.
 # FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
 $extrasub
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
+s|@configure_input@|$ac_sed_conf_input|;t t
 s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
 s&@srcdir@&$ac_srcdir&;t t
 s&@abs_srcdir@&$ac_abs_srcdir&;t t
@@ -3394 +3569 @@
 s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
   { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
   { ac_out=`sed -n '/^[  ]*datarootdir[  ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&2;}
 
   rm -f "$tmp/stdin"
   case $ac_file in
-  -) cat "$tmp/out"; rm -f "$tmp/out";;
-  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-  esac
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
  ;;
 
@@ -3422 +3604 @@
 chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
 
 
@@ -3450 +3637 @@
 if test "$no_recursion" != yes; then
 
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
+  # Remove --cache-file, --srcdir, and --disable-option-checking arguments
+  # so they do not pile up.
   ac_sub_configure_args=
   ac_prev=
@@ -3479 +3667 @@
     -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
       ;;
+    --disable-option-checking)
+      ;;
     *)
       case $ac_arg in
-      *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+      *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
       esac
       ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;;
@@ -3491 +3681 @@
   ac_arg="--prefix=$prefix"
   case $ac_arg in
-  *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+  *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
   esac
   ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
@@ -3500 +3690 @@
   fi
 
+  # Always prepend --disable-option-checking to silence warnings, since
+  # different subdirs can have different --enable and --with options.
+  ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
+
   ac_popdir=`pwd`
   for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
@@ -3508 +3702 @@
 
     ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
-    echo "$as_me:$LINENO: $ac_msg" >&5
-    echo "$ac_msg" >&6
+    $as_echo "$as_me:$LINENO: $ac_msg" >&5
+    $as_echo "$ac_msg" >&6
     { as_dir="$ac_dir"
   case $as_dir in #(
@@ -3518 +3712 @@
     while :; do
       case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
       *) as_qdir=$as_dir;;
       esac
@@ -3527 +3721 @@
          X"$as_dir" : 'X\(//\)$' \| \
          X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
             s//\1/
@@ -3548 +3742 @@
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
     ac_builddir=.
@@ -3556 +3750 @@
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
@@ -3597 +3791 @@
       ac_sub_configure=$ac_aux_dir/configure
     else
-      { echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
-echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
+      { $as_echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
+$as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
       ac_sub_configure=
     fi
@@ -3611 +3805 @@
       esac
 
-      { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
-echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
+      { $as_echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
+$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
       # The eval makes quoting arguments work.
       eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
            --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
-        { { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
-echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
+        { { $as_echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
+$as_echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
    { (exit 1); exit 1; }; }
     fi
@@ -3624 +3818 @@
   done
 fi
-
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+